100W Single Output Switching Power Supply Output SETUP, RISE TIME 500ms, 20ms/230VAC 500ms, 20ms/115VAC at full load Output HOLD TIME (Typ.) 30ms/230VAC 25ms/115VAC at full load Input VOLTAGE
7-inch Colour Touch Screen (HMI) The Touch Screen TPC7062KS Specificationsspecialtyscreen size (inch)7screenTFT, LED-backlitdisplay colourtrue colour, 65Kresolution800×480brigh
CO2 Laser Tube Power Supply BJ-801 * Introduction This power supply is exclusively designed for CO2 laser machine. The output current can be set by user within the max. * Specification
3-phase Hybrid Stepper/stepping Motor Driver/drive Features - PWM Constant wave chopper - Up to 400KHz Pulse response frequency - TTL compatible input signal - 16-level currents, Max current 6.8A/phas
2-phase Hybrid Stepper/stepping Motor Driver/drive High performance, low cost Supply voltage to +40VDC, current to 3.5A Inaudible 20khz chopping frequency TTL compatible and optically isolated input s
4-axis Universal/general-purpose Motion Controller * PCI-BUS * 1 to 4-axis card for stepper motors or digital servo motors * Pulse frequency from 0.02Hz to max 2MHz. * Linear interpolation for mult
3-axis High Performance Motion Controller * Stand-Alone Motion Controller * Apply DSP and FPGA technologies * 3-axis card for stepper motors or digital servo motors * Trapezoidal or S-curv
3-axis Motion Controller * Stand-Alone motion controller * Pulse frequency up to 7.5M Hz * 3-axis card for stepper motors or digital servo motors * RS232 applicable for ma
3-phase Hybrid Stepper/stepping Motor ItemSpecificationsStep Angle1.2°Step Angle Accuracy±5% (full step, no load)Resistance Accuracy±10%Inductance Accuracy±20%Tem
2-phase Hybrid Stepper Motor ItemSpecificationsStep Angle1.8°Step Angle Accuracy±5% (full step, no load)Resistance Accuracy±10%Inductance Accuracy±20%Tem